kX Project Online Help

Hardware Reference

Hardware Reference


Hardware reference information for Live!, Live! Value, Live! 1024, Live! 5.1, E-mu APS, Audigy and Audigy2 cards.

EMU10k1 pins: [1]

Pin

Name

AUD_EXT

SPDIF_EXT

127

spdifo0

17

1

126

spdifo1

19

9

124

spdifo2

22

11

109

spdifo3

9

12

122

cdromi / gpspdifin2 [2]

6

6

123

gpspdifin1

15

106

in0

35

107

in1

33

108

in2

31

8,9,10,11,12

AC97 a1,a2 in; a1,a2 out

112

gpinput0

23

110

gpinput1

24

gpoutput0

13

gpoutput1

10

gpoutput2

11

128

outmidi

25

130

inmidi

27

134,132,131

ZVideo / i2s

Live!, Live! 1024, Live! 5.1, Audigy onboard connections:

TAD

CD

AUX In

PC Speaker

I2S [3]

CD SPDIF [4]

Yellow/Orange[5]

LineIn

modem connector [6]

MicIn

condenser microphone [7]

LineOut

AUD_EXT

SPDIF_EXT [8]

RearOut

Joystick/MIDI [9]

SB1394 [10]

Orange connector:

Note: SPDIF#1 is SPDIFO0; SPDIF#2 is SPDIFO3; third signal not shown (should be before 'GND' for 5.1 and Audigy cards)

Unofficial Inout/Output Information:

Input/Output

Live!

APS [14]

ac97out (front)

ac97 front out

(i2s) a1, a2

spdifo0

digital front; generic SPDIF output

e-card (d1) or a5, a6

spdifo1

front&rear mix (headphones?) or digital center/sub(?)

a3, a4 (d2) or a7, a8

spdifo2

digital center/subwoofer or front\rear mix/phones (?)

a5, a6 or (d1)

spdifo3

digital rear

a7, a8 or a3, a4 (d2)

ac97out (rear)

ac97 analog center/subwoofer (5.1, audigy)

ac97in

ac97 in (l,r)

a1, a2

cdromi

CDSPDIF

e-card, CDSPDIF

zvideo/i2s

on-board i2s(?) / ZVideo?

gpspdif

Optical In (?),generic SPDIF In

e-drive

in0

Line2In / Mic2In (?) and on-board i2s (?)

a3, a4

in1

Coaxial In (?)

in2

AUX2 In (?)

gpinput0

e-drive present(?)

gpinput1

moc present(?)

Please note that an updated information can be found in our 'IO Assignment guide'

Input/Output limitations (according to official PDFs):

Daughterboards:

Digital I/O Card (original, model CT4660):

Optical Digital I/O Card (model CT4770):

(*) – available only if connected via AUD_EXT

Digital I/O Module (model CT4800): -- connected to “Digital I/O”

Digital Output Module (model CT4801): -- connected to 'Orange Jack'

LiveDrive (CT4860), LiveDrive II (CT4861), LiveDrive IR (SB0010), AudigyDrive (?):

(*) – available on LiveDrive II and later models

Digital DIN description:

Pin

Signal

1

GND

2

GND

3

MIDI_IN

4

S/PDIFO#2

5

S/PDIFO#1

6

S/PDIF_IN

7

MIDI_OUT

8

S/PDIFO#0

9

S/PDIFO#3


AUD_EXT connector for Audigy2-boards

Audigy2 AD_EXT connector
1 - 5V
2 - NC
3,4,6,7,8 - Ground
5 - SPDIF-in
9 - SPDIF-out
10 - NC

Audigy2 Scheme (by Samir)


Audigy1 pin-out

http://pinouts.ru/data/creative_int_pinout.shtml

[1]   Official information: based on patents and hwinfo.hlp.
[2]   It is unclear whether gpspdif1/2 are gpspdif0/1 or 1/0 (hwinfo.hlp): i.e. pin123=gpspdif0=audext#15 and pin122=cdromi=audext#6 or visa versa.
[3]    On original Live! only.
[4]    Missing on some 1024 cards.
[5]    Live! 1024, 5.1 and Audigy only.
[6]    On original Live! only (non-OEM) – MB_PRO connector.
[7]    On original Live! only (non-OEM).
[8]    Original OEM cards.
[9]    Not present on Audigy except on 'bulk OEM cards'.
[10]  Audigy only.
[11]  Not verified; unofficial.
[12]  Depends on jumper JP1.
[13]  Not verified; unofficial.
[14]  APS connections are based on the unofficial EMU10k1 pin-out ('Figure 4').

www.kxproject.com