RightMark Audio Analyzer test - Recording test
Testing conditions
Audio output:
Audio inputs:
- a1_aux2 - Audigy Platinum's Audigy Drive AUX2 input
- a2_line3 - Audigy 2 Platinum Ex's Line3 input
- a1_line2 - Audigy Platinum's Audigy Drive Line2/Mic2 input (in Line2 mode)
- a2_line1 - Audigy 2 Platinum Ex's Line1 input
B2B plugin ON for Audigy2 Platinum Ex
B2B plugin OFF for Audigy Platinum (doesn't affect recording)
Surrounder set into '5.1 Direct Path' mode
EQ is OFF
Chorus, Reverb are OFF
Loopback wave recording OFF
Sampling mode: 16-bit, 48 kHz
Summary
| Test | a1_aux2 | a2_line3 | a1_line2 | a2_line1 |
| Frequency response (from 40 Hz to 15 kHz), dB: |
+0.01, -0.10 | +0.03, -0.10 | +0.01, -0.10 | +0.03, -0.10 |
| Noise level, dB (A): |
-89.9 | -95.5 | -93.3 | -90.9 |
| Dynamic range, dB (A): |
89.8 | 95.3 | 93.2 | 91.0 |
| THD, %: |
0.0039 | 0.0028 | 0.0034 | 0.0050 |
| IMD, %: |
0.105 | 0.019 | 0.096 | 0.025 |
| Stereo crosstalk, dB: |
-85.4 | -95.6 | -83.1 | -86.5 |
Frequency response
Noise level
Dynamic range
THD + Noise (at -3 dB FS)
Intermodulation distortion
Stereo crosstalk
This report was generated by RightMark Audio Analyzer 5.0
Copyright © Eugene Gavrilov, kX Project, 2003. All rights reserved.
No part of this document can be reproduced without written permission of the copyright owner.